About the size of a standard business card, and less than 1” thick, BlueSentry-AD easily attaches to sensor outputs, automatically taking continuous measurements. Data is transferred wirelessly to PC and PDA clients using Serial Port Profile. Or pair the BlueSentry with the BluePort II or XP serial adapter and connect to any legacy serial port! Software applications can control and acquire data as if they were connected to a local serial port.

Bluetooth 2.1 class 1 surface mount module without antenna

Bluetooth Version 2.1 compliant. (also compatible with 2.0/1.2 /1.1 ) Embedded stacks support Serial Port Profile, no host or processor stacks required.

Without Antenna, SMA end launch jack. Bluetooth Version 2.1 compliant. (also compatible with 2.0/1.2 /1.1)

Data acquisition and control modules contain an 8 channel 16 bit AD converter (TI ADS8344), sampling analog signals and converting to a Bluetooth-enabled digital data stream.
The device also has two general purpose digital in/outputs and 2 FET power switches for controlling sensor power that can be configured over the same Bluetooth link using simple output commands.

Fully qualified Bluetooth 2.1/2.0/1.2/1.1 module, using CSR BC04 External. Class 1 high power amplifier, on Board ceramic RF chip antenna.

Bluetooth Version 2.1 compliant. (also compatible with 2.0/1.2 /1.1 ) Embedded stacks support Serial Port Profile, no host or processor stacks required. embedded antenna

Support RS485. Without Antenna, SMA end launch jack. Bluetooth Version 2.1 compliant. (also compatible with 2.0/1.2 /1.1)

Data acquisition and control modules contain an 8 channel 16 bit AD converter (TI ADS8344), sampling analog signals and converting to a Bluetooth-enabled digital data stream.
The device also has two general purpose digital in/outputs and 2 FET power switches for controlling sensor power that can be configured over the same Bluetooth link using simple output commands.

The RN-51 is the latest generation of bluetooth technology in a very small package and with very low power requirements.

Fully qualified Bluetooth 2.1/2.0/1.2/1.1 module, using CSR BC04 External. Class 1 high power amplifier, on Board ceramic RF chip antenna.

The RN-42-N is fully compatible with the RN-42; it has no onboard antenna this module is a small form factor, low power, highly economic Bluetooth radio for OEM’s adding wireless capability to their products. The RN-42 supports multiple interface protocols, is simple to design in and fully certified, making it a complete embedded Bluetooth solution. The RN-42-N is also functionally compatible with RN-41.

The RN-42 is a small form factor, low power, highly economic Bluetooth radio for OEM’s adding wireless capability to their products. The RN-42 supports multiple interface protocols, is simple to design in and fully certified, making it a complete embedded Bluetooth solution. The RN-42 is functionally compatible with RN-41.

The RN-42-H is compatible with the RN-42; it has the HCI firmware (HCI over H4 UART) this module is a small form factor, low power, highly economic Bluetooth radio for OEM’s adding wireless capability to their products. The RN-42 supports multiple interface protocols, is simple to design in and fully certified, making it a complete embedded Bluetooth solution. The RN-42-H is also functionally compatible with RN-41.

The RN-42-U is compatible with the RN-42; it has the USB firmware (HCI over USB port, slave device at 12Mbps rate) This module is a small form factor, low power, highly economic Bluetooth radio for OEM’s adding wireless capability to their products. The RN-42 supports multiple interface protocols, is simple to design in and fully certified, making it a complete embedded Bluetooth solution. The RN-42-U is also functionally compatible with RN-41.