General

The RN-24 is a Class 1 Bluetooth through hole module with RS232 interface, status LEDs, and either SMA jack or ceramic on-board antenna.  This low power super module transforms your product's serial interface into a wireless connection.

Its auto-connect and connect-on RX data features, enables your product to transfer data up to 100M.  The RN-24 also accepts a wide range of unregulated DC power.  The DIP packaging with GPIO, UART interfaces, and AD converter allows products to have optional Bluetooth capability when the module is plugged in.

Roving Networks also offers the RN-25 Bluetooth through hole module.  The RN-25 has the same powerful Bluetooth radio and simple ASCI command interface as the RN-24, but it has a RS485 hardware interface rather than a RS232 interface.  Both Bluetooth Super Modules, the RN-24 and the RN-25, are perfect modules for prototyping.

Features

• Standard spacing (.1 or 2mm) DIP header footprint
• On-board regulators can accept 4-20 VDC input power
• TTL or RS-232 level, via on-board RS232 converters
• LED indicators for status
• On-board stacks/profiles make integration simple (no host code)
• Complete embedded solution, simplest mode requires only 4 pin connection (TX, RX, VCC, GND)
• Sustained data performance of >230Kbps
• Advanced features such as auto pairing, auto connect master, enabled using programmable IO pins
• Fully configurable with simple AT style commands locally over UART and remotely over Bluetooth
• Low power consumption, 1mA standby, 5/25/40/60mA connected
• Bluetooth v1.1, 1.2, and 2.0/EDR compliant

Downloads (2)